Avoid an Expensive Plumbing and Drain Service by Keeping Your Shower Drains Clean
Shower drains are some of the most used drains in a bathroom. They are also the most prone to clogging. Hair, soap, and other types of contaminants can block your drains and cause them to back up if not cleaned immediately. Luckily, unclogging shower drains is not as hard as you may imagine. All you have to do is follow these simple guidelines. This being said, if these methods don’t work, then you need to hire a professional plumbing and drain service provider.
Step 1. Remove the strainer cover
Every shower cabin must be equipped with a strainer cover. However, these covers often get broken or missing. If you don’t have a strainer cover, then you must purchase one as soon as possible. These covers are designed to stop hair and other contaminants from going down the drain. But, if you do have a cover, then remove it using a screwdriver. Once the cover is out, you’ll have access to the drain opening. Use a flashlight to inspect the drain for any obvious clogs. If you can see the clog, then use a stiff wire to remove it or at least break it apart so that you can flush it.
Step 2. Plunging
There are cases when the clog cannot be seen through the drain opening. In these situations, use a plunger to loosen the clog. Plunging forces the clog to move back and forth inside the drain, allowing water to seep through or around it. The process is straightforward – all you have to do is place the rubber cup over the drain opening, run enough water into the shower to cover the lip of the cup, and then move the plunger up and down.
Step 3. Check the result
Run your shower and check to see how quickly the water drains. If the shower is still clogged or the water drains slowly, then call a plunging and drain service provider. Perfection Plumbing of Riverside is one of the most reliable and affordable plumbers in Riverside CA.
If you have problems with your drains, then call us at (951) 228-0092.